 printable version
Technical data
Clutch | Hydraulic | | The diameter of the friction lining (external x internal), mm | 225h150 (2.5 L) 215h145 (2.0 L) | | Mounting the clutch cover load, N | 4500-4900 (2.0 L) 5400-5800 (2.5 L) | | The inner diameter of the main cylinder, mm | 20.64 | | The inner diameter of the cylinder, mm | 15,87 |
Adjusting data | Thickness of the clutch disc, mm | 8,3 -8,9 (2,5) 8.2 -8.8 (2.0 L) | | Height of installation of a pedal of coupling mm | 180,5 ?± 0,3 | | Free travel, mm | 6-13 | | The clutch pedal, mm | 150 | | Minimum distance to heads of rivets at the limit of wear clutch facings, mm | 0.3 | | The difference between the height of the ends of the diaphragm spring, mm | 0.5 | | The clearance between the piston and the clutch slave cylinder, mm | 0.15 | | The clearance between the piston and the clutch master cylinder, mm | 0.15 |
Recommended lubrication Elements | Grease | | The contact surface of release bearing and clutch release bearings | CASMOLY L 9508 | | The inner surface of release bearing | CASMOLY L 9508 | | The inner surface of the clutch cylinder, the piston and sleeve | Brake Fluid DOT 3 | | Slots clutch | CASMOLY L 9508 | | The inner surface of the clutch master cylinder, the piston and sleeve | Brake Fluid DOT 3 | | Pusher clutch master cylinder, a pin with a head and an aperture under the cotter pin and washer | SAE J310a, NLGI ?„–2 | | The shaft and the clutch pedal bushing | SAE J310a, NLGI ?„–1 | | Clutch fork | CASMOLY L 9508 | | Slots a primary shaft of a transmission | CASMOLY L 9508 |
Tightening torques, N ??? m | Bracket clutch pedal | 25-35 | | Bolt clutch master cylinder | 8-12 | | The connecting pipe coupling nuts | 12-16 | | Bolt cylinder clutch | 15-22 | | Bolt connection cylinder clutch | 25 | | Clutch cover (2,0) | 15-22 | | Clutch cover (2.5 L) | 20-27 | | Locknut clutch master cylinder pushrod | 10-15 | | Clutch master cylinder reservoir | 8-10 | | Switch the ignition lock | 8-10 |
|
