REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sephia / Shuma (1995 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Sephia / Shuma
		Maintenance
		Engine
		Greasing system
		Cooling
		The power supply system and release
			Adjusting accelerator cable
			Check the air filter element
			The elements of the exhaust system
			The filter element air filter
			Check ignition timing and idle speed
			Electronic engine control module (ECM)
			Check crankcase ventilation (PCV)
			Checking system EVAP
			Check valve system EVAP
			Checking fuel vapor separator
			Check bilateral control valve
			Check of the canister with the activated coal
			Check valve fuel vapor
			Sensor Flow air (TED)
			Check vacuum
			Sensor Flow air (TED)
			Coolant temperature
			Throttle Position Sensor
			Heated Oxygen Sensor
			:20. Checking the front and rear heated oxygen sensors
			The main relay
		Fuel system
		Ignition system
		Coupling
		Manual transmission
		Automatic Transmission
		Axes and power shafts
		Steering
		Wheels and tires
		Brakes
		Suspension
		Body
		The air conditioning system
		Electrical equipment

The main relay

Refitting

PERFORMANCE ORDER

1. Remove the cover from the main fuse and relay box.
2. Press your finger to the main relay.
3. Check that the ignition is switched on, the relay clicks.
4. Make sure that when you turn off the ignition switch and clicks.
	5. Remove the relay, and additional wires submit pressure from the battery to the contacts 85 and 86 of the main relay.
6. Check that pins 87 and 30 of the main relay closes when energized and open when the voltage is switched off.
7. Otherwise, replace the main relay.
8. Turn the ignition off.
	9. Replace the relay fuse and relay box. Close the unit cover.

next page »
Fuel system