| 1. Remove the interior door trim. |
| 2. Carefully remove the sealing tape. Be careful: the film is easily torn. |
 | 3. Glass Window drop as low as possible until the screw (2) will be in the mounting hole. (3 - bus window, 1 - glass.) |
| 4. Remove the screw (2) on the front of the bus window. |
| 5. Gently lift the rear window and remove the biscuits from the bus window. |
| 6. Press the glass upwards and insure it from falling out plastic or wooden wedge. |
 | 7. windows (4) is riveted. Drill out the rivets 6 (8) drill 4, 8 mm. At the same time, ensure that the drill was not included in the inner plate of the door. For riveting essential tool for countersunk rivets. |
| 8. Pull out the bus windows and pull down. Remove the power window with the motor. Disconnect window. |
Do not damage the film - it must flawlessly carry out the sealing.