 | 1. Check the installation position of the glass in its easy opening. The gap should be uniform top, bottom glass should be included in the guide rail, otherwise adjust. |
| 2. Remove the inner door trim. |
3. The sealing film at the bottom of carefully remove.
A warning  The film is easily torn.
|
| 4. Glass door windows are lowered until the bolt is in the mounting hole. Loosen the bolt, without unscrewing it. |
| 5. Insert the glass on top of the rear bus window glass at the same time adjust up or down, tighten the bolt. |
| 6. Use the handle by raising and lowering the glass, check the ease of movement. |
| 7. Attach the wrinkle-free sealing film. Warning: the film must not be damaged and should provide flawless tightness. |
| 8. Set the inner door trim. |
