| Front seat |
| 1. Disconnect the battery from weight. |
| 2. Slide the seat forward to the refusal by a regulator. |
| 3. Remove the cover from the outer seat rail. |
| 4. Remove the screw and remove the cover plate on the inside of the guide. |
| 5. Remove the rear seat bolts. |
| 6. Slide the seat to the full back and unscrew the front bolts. |
| 7. Tilt the seat back and disconnect the connector under the seat. |
| 8. Remove the seat. |
| Rear Seat Cushion |
| 1. Fold the back, remove the bolts and nuts of the hinge to the floor and remove the seat cushion with hinges. |
| 2. Place the pillow in the reverse order. |
| Rear seat armrest |
| 1. Fold the pillow forward and back. |
| 2. Remove the screws on the bottom of the roller, unhook and remove the armrest. |
| 3. Install the armrest in the reverse order. |
