| 1. Run 1-5 subsection 10.9.1. |
| 2. Raskontrit nut brake hose nozzle to facilitate further dismantling. |
| 3. Remove the cap 25 (see. Fig. Rear disc brakes) from the valve 24, the air discharge. |
| 4. Disconnect the cable 1 (see. Fig. Removing rope hand brake) Parking brake lever 2 from. |
| 5. Remove the upper bolt 20 (see. Fig. Rear Disc Brake) fixing the housing 26 of the cylinder to the caliper 16, holding a wrench guide rod 21. |
| 6. Remove the bottom bolt 29. |
| 7. Clamp the brake hose, taking care not to damage it. |
| 8. Unscrew the brake hose from the cylinder body, substituting pre capacity. |
| 9. Plug the hole of a brake hose. |
| 10. Release valve 24 to vent the cylinder body. |
| 11. Remove the protective cap 17. |
| 12. Remove the piston 18 from the cylinder with the help of the hexagon. |
| 13. Remove the collar 19 of the cylinder. |
A warning  To remove the cuffs use a wooden spatula. Use of metal objects is undesirable because it can lead to damage of the seat under the cuff.
|
| 14. Rinse alcohol piston and cylinder. |
| 15. Inspect the working surface of the piston and cylinder. |
A warning At presence on working surfaces of the piston and cylinder for wear, nicks and jamming replace the piston and the cylinder housing in the kit.
|
