REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Golf IV (1997 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Volkswagen
	Golf 4
		Instructions
		Engine
		Cooling system
		Fuel System
		Exhaust system
		Ventilation and heating system
		Coupling
		Transmission
		Suspension brackets and power shafts
		Steering
		Wheels and tires
		Brakes
		Body
			Care body
			Care of an upholstery and rugs
			Repair of insignificant damages of a body
			Repair of strong damages of a body
			The front body panel
			Removing and installing front bumper
			Removing and installing rear bumper
			Removal and installation of a forward wing
			Removal and installation of facing of a niche of a forward wing
			Removal and installation of facing of a niche of the rear wing
			Hood
			Hood lock
			Removing and installing radiator grille
			Removal and installation of a lateral overlay of a body
			Door
			Luke
			Purification gutter
			Mirrors
			The center console
			Removal and installation of the top furnish in space for feet of the driver
			Removal and installation of the glove compartment
			Removal and installation of a lateral covering of space for feet
			Removal and installation of overlays of thresholds
			Removal and installation of the bottom facing of the central rack
			Removal and installation of the right lateral covering of a luggage space
			Removing and installing luggage compartment floor coverings
			Removal and installation of back furnish of a luggage space
			Removing and installing front seat
			Side airbags
			Removing the rear bench seat cushion
			Removing and installing rear seat backrest
			Washers and wipers
				Replacement of rubber tapes of brushes of screen wipers
				Adjusting windscreen washer nozzles
				Removal and installation of windshield washer nozzles
				Removing and installing rear window washer nozzles
				Removing and installing wiper arms
				Removing and installing windscreen wiper motor
				Removal and installation of tanks and washer pump
				Removing and installing rear window wiper motor
		Electrical equipment and wiring

printable version

Removal and installation of tanks and washer pump

Location nuts washer fluid reservoir

Nut is shown by the arrow.

Washer tank is installed in the front right side of the engine compartment.

Withdrawal

PERFORMANCE ORDER

1. Remove the two screws securing the coolant expansion tank and, without disconnecting from it hoses, move it to the side.
2. Unscrew the two screws holding the activated carbon filter and, without disconnecting from it hoses, move it to the side.
	3. Unscrew the nut (arrow) securing the tank washer.
4. Disconnect the electrical connector and remove the water pump from the washer fluid reservoir.
5. Remove the washer reservoir.

Setting

Installation is made in sequence, return to removal.

« previos page
Removing and installing windscreen wiper motor

next page »
Removing and installing rear window wiper motor