 printable version
The central air vents
Withdrawal From under the glovebox squeeze clamps and remove trim finish dashboard.
| Fig. 17.10. Fastening ventilation grille (2) on the dashboard (1) of spring fasteners (4) and use a screwdriver (3) for removing the gratings
|
Ventilation grilles 2 (Fig. 17.10) mounted on the dashboard 1 4 spring clips. Open the air vents.
| Fig. 17.11. Dimensions of the special tool made of wire having a diameter of 3 mm, for removing air grilles: X = 12 mm; Y = 2 mm
|
In a ventilation grille insert special tool A (
| Fig. 17.12. Using a special tool (A) to release the upper spring clips, tool (C) to release the spring clips of the lower ventilation grille and a screwdriver (B) to hold the clips in the filter condition
|
Fig. 17.11 and 17.12), turning, remove the spring clips from the ventilation grille and insert a screwdriver into the clamp to hold depressed for. Blade screwdriver 3 (see. Fig. 17.10), pry and remove the ventilation grille from the instrument panel.
Setting Insert the ventilation grille in the hole and press the instrument panel until it snaps into the spring clips. Install the trim finish dashboard.
| 
