Heater controls

Depending on the engine (petrol or diesel) set various heater controls: the button ?�Econ?� or without.

The control unit uses different panels finishing unit, depending on the presence or absence of heaters front seats.

If there is no illumination of the unit heater control, check the voltage at the terminals 58d and 58s dimmer.

Withdrawal

Before disconnecting the battery find out whether you have a code switch on the radio.

Switch off the ignition and disconnect a wire of "weight" from the storage battery.

Remove the radio.

Remove frame finishes radio and heater controls.

Remove the screws 1 (Fig. 17.4).

Remove the front section of the center console.

Remove the screws and remove the holder heater controls and radio (Fig. 17.5).

On the back of the heater control unit, disconnect the electrical connectors.

Release the clips, disconnect the cable and remove the heater controls.

Setting

Installation is spent to sequences, return to removal, taking into account the following.

Fix a cable heater control, as shown in Fig. 17.6 .Connect wire of "weight" to the battery.

Turn on the radio and enter the code.

Lift up the power window glass until it stops. Then click on all window switches again for at least 1, in the closed position of the control unit to activate windows.

Set the clock.

After disconnecting electrical connectors stored in memory errors that need to be revoked after installation.