add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Audi A6 (1997 release)

general info. full specifications. diagnostics. hints. tips. tricks
Audi A6
Home
 
Audi
A6
General Information
Operation of the vehicle
Maintenance
Maintenance intervals
Service vehicles manufactured through 1999, with the use of conventional motor oil
Service vehicles manufactured since 2000, using oil with long life "LongLife Service"
Motor oil
Changing the oil and oil filter
Engine cooling system
Replacing spark plugs
Vehicles with four-cylinder engines V5
Vehicles with four-cylinder turbo c
Vehicles with six-cylinder engines
Vehicles with a six-cylinder turbo c
Check spark plugs
Draining water from the fuel filter of the diesel engine
Replacement of the fuel filter of the diesel engine
Replacing the air filter element
Check the pressure in the crankcase of diesel engines AFB, AKN
Checking the oil in a mechanical transmission
Replacement and check of level of oil in an automatic transmission
Check the front suspension and steering
Check brake fluid level
Checking the front brake pads
Checking the rear brake pads
Check the fluid level in the power steering
Pollen filter
Door hinges
Checking toothed belt
Code and engine number
Lifting the car
Towing
Tire pressure
Engines
Ignition, fuel injection and exhaust of gasoline engines
The power supply system, and preheating the exhaust gases of diesel engines
Lubrication System
Cooling system
Coupling
Transmission
The front wheel drive shafts
Design features four-wheel drive transmission
Suspension
Wheels and tires
Steering
Brakes
Body
Heating and air conditioning
Electrical
Electric schemes
 


Hit Counter by Digits


print page printable version

Vehicles with a six-cylinder turbo c



Switch off the ignition.
Remove the screws and remove the engine cover.
The right cylinder head
Remove the air filter cover.

Location hose clip and bolt
Fig. 2.10. Location hose clip and bolt: 1 - a collar; 2 - Bolt


Loosen the clamp 1 (Fig. 2.10) and remove the hose mounting bolt 2.
Disconnect the electrical connectors from the ignition coil.
Unscrew the screws on ignition coils and remove the coil.
Remove the spark plug wrench 3122 B.
Check and, if necessary, replace the O-rings, install the ignition coil and secure with bolts, tightening torque 10 Nm.
The left cylinder head
Remove the screws and take aside the expansion tank, without disconnecting from it hoses.

Location hose clip and bolt
Fig. 2.11. Location hose clip and bolt: 1 - a collar; 2 - Bolt


Loosen the clamp 1 (Fig. 2.11) and remove the hose mounting bolt 2.
Disconnect the electrical connectors from the ignition coil.
Unscrew the screws on ignition coils and remove the coil.
Remove the spark plug wrench 3122 B.
Check and, if necessary, replace the O-rings, install the ignition coil and secure with bolts, tightening torque 10 Nm.
Reinstall and screw the expansion tank.




« previos page
Vehicles with six-cylinder engines
next page »
Check spark plugs

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.