Possible fault cause | Remedy |
Vibration, noise in the gearbox |
Loose or damaged suspension supports the engine and gearbox | Tighten or replace attachment support |
The axial clearance does not correspond to the shafts OK | Adjust axial clearance |
Worn or damaged gear | Replace gear |
Flooded oil inappropriate brand | Pour the correct grade of oil |
Insufficient oil level | Add oil to the norm |
Violation of the idle speed control Engine | Adjust the engine idle |
Oil leak |
Destroyed or damaged seals or O-rings | Replace gaskets or O-rings |
Difficulty shifting gears |
Faulty cable drive shift | Replace the cable of a drive gear |
Gapping block or wear rings and cones synchronizers | Repair or replace parts |
The weakening of the springs of synchronizers Flooded oil inappropriate brand | Replace synchronizer spring Pour the correct grade of oil |
Spontaneous off gear |
Wear shift forks or broken spring clamp | Replace the plug or retainer |
The increased coupling backlash synchronizer on a nave | Replace the hub and clutch synchronizer |
