Job stereo receiver (N210) (optional)

ON / VOL (power switch / volume knob / knob left / right stereo balance, switch scanning).

Radio works when the ignition key is in the ?�ON?� (?�On.") Or "ACC" ("Options"). Turn the knob clockwise to turn the power on and increase the volume. The LCD display mode shows the radio frequency reception of the station. to decrease the volume and turn power off the radio, turn the knob counterclockwise.

BAL (knob left / right stereo balance).

Pull the handle and turn it clockwise to increase the volume of the right speaker (left speaker volume decrease). By turning the knob clockwise increases the volume of the left speaker (right speaker volume decreases). After adjusting Depress the handle to its original position to take advantage of its other functions.

SCAN (automatic pen tincture receivable stations).

By clicking on this knob increases the frequency of the receiver is configured for 5 sleep one after the other receiving stations. To stop automatic infusion press again this button.

FAD (knob front / rear audio balance).

Turn the knob clockwise to increase the volume of the front speakers (the volume of the rear speakers is reduced). By turning the knob clockwise increases the volume of the rear speakers (front speaker volume decreases).

BASS (adjustment knob tone in the low audio frequencies).

Push the knob to eject it out and turn it left or right to set the desired tone in the low audio frequencies.

TREBLE (adjustment knob tone in the treble).

Pull the handle is pulled out at the next fixed position. Turn it left or right to set the desired tone in the treble.

FM / AM (range selection button).

When you press this button, the band AM, FM1 and FM2. The selected range is displayed on the LCD.

TUNE (the manual infusion rate).

Click on the side or this button to increase or decrease the frequency. If you hold the button for 1 second stop signal (steady signal station) will be ignored and the search for the next.

Automatic infusion frequency.

Press and hold the tuning frequency (TUNE) for 1 second or longer. By clicking on the side , The radio automatically tunes to the next station with a stable signal and a high frequency broadcasting, and when you press the side - The radio automatically tunes to the next station with a lower frequency broadcast.

Buttons storing stations.

You can add to the memory of the radio 6 stations in each band AM, FM1 and FM2.

Storing the stations

In Memory of the radio, you can make 6 stations in the AM band and 12 stations in FM. After that, pressing the range selection and one of the six buttons storing stations you can select one of them. to put in the memory of the station, follow these steps:

- Click on the button to select the range in order to select one of the band AM, FM1, or FM2.

- Select the station you wish to store in memory, using manual or automatic tuning;

- Select the memory station that should be assigned to this station;

- Press and hold the button to store the stations for two or more seconds. The display shows the index number of the selected button storing stations. After store the frequency of its value will be flashing. Release the button and continue storing the next desired station.

Total 18 stations can be programmed by setting a button, a station broadcasting in the AM band, and two - in FM.

At the end of programming including any of the preset stations, after selecting one of the band AM, FM1, or FM2, and clicking on the appropriate button memory frequency stations.