REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Sonata (2001 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Hyundai
	Sonata
		General Information
		Engine
		Transmission
		Steering
			Overview
			Technical data and characteristic steering
			Performance Materials
			Check fault
			Service checks and adjustments
			Elements of the steering
				The steering column and steering shaft
				Steering gear
				Removal, check and installation of hoses steering
				Power steering pump
			Electronic power steering system EPS
		Chassis
		Brakes
		Body
		Additional security
		Systems of heating, ventilation and air conditioning, air-
		Electrical
		Diagrams

printable version

Removal, check and installation of hoses steering

Fig. 4.35. Hoses of power steering: 1 - Nut Cone tube fluid return; 2 - Cone Nut discharge tube; 3 - a bolt, 4-6 Nm; 4 - a returnable hose; 5 - suction hose; 6 - pressure hose; 7 - Connect 70-80 Nm

Hoses of power steering are shown in Fig. 4.35.

Drain the hydraulic power steering.

Disconnect the suction and return hoses from the tank.

Remove the nut pressure hose.

Disconnect the pipe and remove the rubber return hose with sealing cone and O-ring.

Disconnect the cooling.

Check the hoses for damage or chafing.

Make sure the hose is not pinched by other components.

Installation is performed in reverse order of removal.

« previos page
Steering gear

next page »
Power steering pump