add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Sonata (2001 release)
general info. full specifications. diagnostics. hints. tips. tricks
 Hyundai Sonata
Home
 
Hyundai
Sonata
General Information
Engine
Transmission
Steering
Chassis
Overview
Technical data Suspension
Lubricants
Data for maintenance
Check fault
Front suspension
Rear suspension
Wheels and tires
Overview
Tyre wear
Snow chains and winter tires
Wheel balancing
The corners of the front axle
Camber
The angle of inclination of the longitudinal axis of rotation
Runout
Tightening the wheel nuts
Shift of wheels
Check with the pull to one side and "yaw"
Recommendations for the use of aluminum alloy wheels
Brakes
Body
Additional security
Systems of heating, ventilation and air conditioning, air-
Electrical
Diagrams
 


Hit Counter by Digits


print page printable version

Runout



Raise the vehicle and place it on the stand.

Installation locations of the measuring tip of a dial indicator to measure the runout wheels
Fig. 5.35. Installation locations of the measuring tip of a dial indicator to measure the runout wheels


Dial gauge, measure the beating wheel drive (Fig. 5.35).
If the disc runout exceeds the permissible values (see. Below), replace the wheel or disc.

The beating of wheels, mm
Steel wheels:
radial runout (average value of the left and right wheels) ..... 0.6
runout ..... 1.0
Alloy wheels (radial and axial run-out) 0.3




« previos page
The angle of inclination of the longitudinal axis of rotation		 next page »
Tightening the wheel nuts

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.