 printable version
The electronic leak detector
Check for leaks with electronic leak whenever their presence is expected or after application, in which the elements were disassembled conditioning system.
A WARNING In order to properly use the leak detector, you need to read the instruction manual that describes the operation of inspections and maintenance. |
Electronic Leak Detector - a precision instrument that detects even small amounts of halogens. For its correct use, carefully read the instructions that came with the device. If a gas leak is detected, follow these steps. 1. Check the torque connections and tighten them if necessary. With the device, check for leaks. 2. If the leak persists even after tightening the connection, remove refrigerant from the air conditioning system, disconnect the connection and check them for damage. Replace the compound, even if minor damage. 3. Check the oil in the compressor of the conditioner and if necessary add it. 4. Charge the air conditioning system refrigerant and check again for leaks. If leaks are found, discharge and recharge the system.
| 
