add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Spectra (2004 release)

general info. full specifications. diagnostics. hints. tips. tricks
Kia Spectra
Home
 
Kia
Spectra
Device Car
Operating Guidelines
Faults in the way
Maintenance
Engine
Transmission
Chassis
A steering
The brake system
Electrical
Design Features
Fault diagnosis onboard electric equipment
Mounting blocks
Accumulator battery
Generator
Starter
The switch (lock) of ignition
Ignition system
The engine management system
Design Features
Removal and installation of engine-ECU
Replacing the engine management sensors
Lighting, light and sound alarm
Windscreen wiper
Removing and installing windshield washer
Removal and installation of the fan motor cooling radiator
Fan heater
Rear window
Removing and installing cigarette lighter holder
Device combination
Replacing control lamps and instrument lighting
Replacing control unit exterior rear-view mirrors and headlamp controller electroproof
Replacing the instrument panel switches
Replacing the backlight switches dashboard
Refitting hours
Removal and installation of the block ETWIS
Car audio system
Replacement sensors and switches
Anti-theft immobilizer system
Body
Car Care
Purchase of spare parts
A trip to the STO
Winter car operation
Preparation for technical inspection
Applications
Diagrams
 


Hit Counter by Digits


print page printable version

Removal and installation of engine-ECU



You will need a key "10".
1. Disconnect a wire from the plug ?�-?� the storage battery.
2. Remove the upper trim panel of devices (see. "Removal and installation of facing of the upper instrument panel").
Removal and installation of engine-ECU
Removal and installation of engine-ECU
3. Remove the side trim dashboard console (see. "Removing and installing the side facing the dashboard console").
4. Remove bottom right trim panel of devices (see. "Removing and installing the right lower trim dashboard").
Removal and installation of engine-ECU
Removal and installation of engine-ECU
5. Loosen the left bolt ECU ...
6. ... and unscrew the two screws securing the right.
Removal and installation of engine-ECU
Removal and installation of engine-ECU
7. Bring the computer from the console.
8. Pull the lock pad harness.
Removal and installation of engine-ECU
9. Disconnect and remove the ECU.
10. Install the parts in reverse order of removal.




« previos page
Design Features
next page »
Replacing the engine management sensors

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.