add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Spectra (2004 release)

general info. full specifications. diagnostics. hints. tips. tricks
Kia Spectra
Home
 
Kia
Spectra
Device Car
Operating Guidelines
Faults in the way
Maintenance
Engine
Transmission
Chassis
A steering
The brake system
Electrical
Design Features
Fault diagnosis onboard electric equipment
Mounting blocks
Location of fuses and relays
Replacing relays, fuses and fuse-links
Removing and installing mounting block
Accumulator battery
Generator
Starter
The switch (lock) of ignition
Ignition system
The engine management system
Lighting, light and sound alarm
Windscreen wiper
Removing and installing windshield washer
Removal and installation of the fan motor cooling radiator
Fan heater
Rear window
Removing and installing cigarette lighter holder
Device combination
Replacing control lamps and instrument lighting
Replacing control unit exterior rear-view mirrors and headlamp controller electroproof
Replacing the instrument panel switches
Replacing the backlight switches dashboard
Refitting hours
Removal and installation of the block ETWIS
Car audio system
Replacement sensors and switches
Anti-theft immobilizer system
Body
Car Care
Purchase of spare parts
A trip to the STO
Winter car operation
Preparation for technical inspection
Applications
Diagrams
 


Hit Counter by Digits


print page printable version

Replacing relays, fuses and fuse-links



Replacing relays, fuses and fuse-links
Replacing relays, fuses and fuse-links
1. To gain access to the mounting fuse box located in the passenger compartment, remove the cover by pushing the release lever in the direction indicated by the arrow.
2. To gain access to the mounting block of additional relays remove the left lower trim panel of devices (see. "Removing and installing left lower trim dashboard").
Replacing relays, fuses and fuse-links
Replacing relays, fuses and fuse-links
3. To gain access to the mounting block, located in the engine compartment, press the clip ...
4. ... and open the lid.

Mounting block additional relay in the cabin
Fig. 10.3. Mounting block additional relay in the cabin: 1 - blinker and alarms; 2 - relay central locking; 3 - fog lamp relay


5. Before replacing a blown fuse, relay, or fuse, find out the reason they burn and eliminate it. When troubleshooting, check indicated in Table. 10.1 and 10.2, as well as Fig. 10.3 circuit that protects the fuse, relay or fuse.

A WARNING
Do not replace fuses jumpers or fuses, designed for a different current, as well as homemade jumper - this can cause damage to electrical appliances and even a fire.

Replacing relays, fuses and fuse-links
Replacing relays, fuses and fuse-links
6. Hook the tweezers located in the mounting block, fuse ...
7. ... and remove it from the connector.
Replacing relays, fuses and fuse-links
Replacing relays, fuses and fuse-links
8. It looks like a blown fuse (arrow inside of the bridge burned and parted). To replace the fuse, you can use the spare fuse of the same value (and color).
9. To replace, remove the relay, shaking it from side to side.
Replacing relays, fuses and fuse-links
Replacing relays, fuses and fuse-links
10. Fuse replaced similarly relays.
11. To replace the relay, remove the additional relay holder, relay pulling away from the mounting block ...
Replacing relays, fuses and fuse-links
12. ... and disconnect from the relay harness connector by depressing the lock pads.
13. Install the parts in reverse order of removal.




« previos page
Location of fuses and relays
next page »
Removing and installing mounting block

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.