add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 3 (2003 release)

general info. full specifications. diagnostics. hints. tips. tricks
Mazda 3
Home
 
Mazda
3
Operation and maintenance of car
eleven Description of vehicle
Restraint System
Car use to destination
Engine start
Start the engine using a conventional key
Start the engine using the auxiliary key with worn cards ?�Advanced Key?�
Shutdown of the engine using the auxiliary key
Control manual gearbox
Control automatic transmission
The system ESP (cruise control)
The traction control system (TCS)
Protivozanosnaya system (DSC)
Stabilization of the rear axle
Hitch
Troubleshooting arisen in a way or before driving
Tables
Engine
Transmission
Chassis
Steering Gear
Brakes
Onboard electric
Body
 


Hit Counter by Digits


print page printable version

Start the engine using a conventional key



If the steering wheel is locked to prevent theft of the vehicle, the key can be removed from the ignition switch when the ignition switch is set to ?�LOCK?� (locking).

Start the engine using a conventional key
Fig. 1.148. Start the engine using a conventional key



Gasoline engines.
1. The driver and all passengers in the vehicle should fasten your seat belts appropriate.
2. Check that the parking brake is on.
3. Press the brake pedal.
4. If you have a car with a manual transmission, fully depress the clutch pedal and move the shift lever to the neutral position. Hold the clutch pedal fully depressed while the starter.
If you have a car with automatic transmission, move the lever switch ranges to the "P" (parking). If you want to start the engine while driving, move the lever range switch ?�N?� (neutral).

NOTE
For vehicles with automatic transmission:
- The starter is locked when the switch lever range is not in the "P" (park) or ?�N?� (neutral).

5. Turn the ignition switch to ?�START?� (starter) and hold the handle in this position before starting the engine (but not longer than 10 seconds).
6. After starting, allow the engine to idle about 10 seconds.

NOTE
When the key is turned in the ignition with difficulty, rock steering wheel from side to side to relieve the load on the locking member.

The position "ACC" (auxiliary power consumers).
In this position, the ignition switch the steering wheel is not locked, and the power supply is provided by auxiliary devices.

The position ?�ON?� (ignition on).
In this position, the ignition switch is in the engine after its start. Before starting the engine check the status of alarms.

NOTE
For vehicles with a petrol engine:
- When you turn the ignition switch to ?�ON?� (ignition switched on) you can hear the fuel pump working noise coming from the area of the location of the fuel tank. This is normal and not a malfunction of the vehicle.
For vehicles equipped with automatic headlight range control:
- When you turn the ignition switch to ?�ON?� (ignition switched on) you can hear the sound of running an electric drive-leveling, coming from the front of the engine compartment. This is normal and not a malfunction of the vehicle.

The position ?�START?� (starter).
In this position, the starter motor. The starter continues to run as long as you hold the ignition key in position ?�START?�. When you release the ignition key back to position ?�ON?� (ignition on).




« previos page
Engine start
next page »
Start the engine using the auxiliary key with worn cards ?�Advanced Key?�

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.