add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 3 (2003 release)

general info. full specifications. diagnostics. hints. tips. tricks
Mazda 3
Home
 
Mazda
3
Operation and maintenance of car
eleven Description of vehicle
Restraint System
Car use to destination
Troubleshooting arisen in a way or before driving
Spare wheel and tool kit
Ammunition jack
Spare wheel
Replacing a faulty wheel
Removing faulty wheel
Installing the spare tire
Engine overheating
Vehicle recovery
General information and safety measures for Inspection and maintenance of the car
Lamps lighting devices and light-signaling
Caring for your vehicle and
Tables
Engine
Transmission
Chassis
Steering Gear
Brakes
Onboard electric
Body
 


Hit Counter by Digits


print page printable version

Installing the spare tire



1. Clean cloth sealing surfaces of dirt on the disc wheel and hub, and studs.
2. Place the spare tire.
3. Screw the wheel nuts on the studs (tapered side screws should be turned to the wheel). Tighten the nuts by hand.

Order of a tightening fastening screws when installing the spare tire
Fig. 1.167. Order of a tightening fastening screws when installing the spare tire


4. Turn the crank handle of the jack counterclockwise lower the car. Use the wheel wrench to tighten the nuts in shown in the figure 1.167 sequence.
The tightening torque of the wheel nuts - 88-117 (9-11) Nm (kgf-m)
5. Place the defective wheel niche in luggage compartment and secure the wheel with the help of pressure washers and bolts.
6. Check the air pressure in the tire.
7. As soon as possible repair the damaged wheel or replace it with a new one.




« previos page
Removing faulty wheel
next page »
Engine overheating

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.