REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 3 (2003 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mazda
	3
		Operation and maintenance of car
		Engine
			General description new engines models L8, LF, L3
			The mechanical part of engines
			Appendix 1
			Annex 2
			Appendix 3
			Engine Z6 - mechanical part
				Verify accessory drive belt
				Check thermal gaps in the mechanism of the valve
				Compression Test
				Removing and installing timing chain drive
				Replacing gaskets cylinder
					Withdrawal
					Setting
					Install the camshaft bearing caps
				Replacement of a forward epiploon of a cranked shaft
				Replacing the crankshaft rear oil seal
				Removing and installing engine
			Lubrication system
			Cooling system
			Intake system
			Fuel system
			Exhaust and Emission
			Ignition system
			Control system
			Tables
		Transmission
		Chassis
		Steering Gear
		Brakes
		Onboard electric
		Body

printable version

Install the camshaft bearing caps

Install the camshaft to TDC cylinder ?��1, and install the camshaft.

Fig. 2.275. Regulation setting the camshaft bearing caps

Install the camshaft bearing caps in those provisions, as shown in Figure 2.275, and then temporarily tighten the cover bolts and bearings ?��2 ?��7 camshaft.

Fig. 2.276. Order of a tightening of bolts of fastening of covers of bearings of a cam

Tighten the camshaft bearing caps in 2-3 passes uniformly in the order shown in Figure 2.276.

The inhaling moment: 11,3-14,2 Nm.

Install the remaining components in the reverse order of removal.

Check the compression.

« previos page
Setting

next page »
Replacement of a forward epiploon of a cranked shaft