add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 3 (2003 release)

general info. full specifications. diagnostics. hints. tips. tricks
Mazda 3
Home
 
Mazda
3
Operation and maintenance of car
Engine
Transmission
Chassis
Steering Gear
Overview
General checks
Working with a steering operation
Precautions with the system of passive safety (SRS)
Removal, check and installation of the steering wheel and steering column
Disassembly of the steering mechanism and steering rods
Dismantling steering rod
Dismantling the pinion shaft and housing
Dismantling of the upper bearing and seals
Dismantling the gland inner guide
Check the steering gear and steering rods
Removing and installing power steering pump
Tables
Brakes
Onboard electric
Body
 


Hit Counter by Digits


print page printable version

Dismantling the gland inner guide



Install special tools to the side of the valve.
Install the special tool on the pinion housing.

Pulling out oil seal and the inner rail
Fig. 5.25. Pulling out oil seal and the inner rail


Extract the oil seal and the inner rail (Fig. 5.25).

Pulling out of the rubber bearing from the housing of the steering mechanism
Fig. 5.26. Pulling out of the rubber bearing from the housing of the steering mechanism


Press out rubber mount out of the housing of the steering mechanism using the special tools and a press (fig. 5.26).




« previos page
Dismantling of the upper bearing and seals
next page »
Check the steering gear and steering rods

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.