 printable version
Cancel code
Perform each procedure (1-3) for 10 seconds, otherwise the installation procedure code will be stopped. 1. Set the ignition switch to the ACC, and then turn off the audio unit. 2. First, press AUTO-M, then simultaneously press channel button 6 for approximately 2 seconds until the display shows ?�CODE?�.
3. Press the AUTO-M again, then simultaneously press channel button 6 until the display shows a rectangle. 4. Channel selection buttons 1-4 are used to enter the current code. Button 1 sets the first digit, 2 - second 3 - third, 4 - the last digit. Enter a number within 10 seconds. If the display disappears, repeat the procedure, starting with the first.
NOTE Procedure 5 must be performed within 10 seconds after 4 treatments. |
5. At the time code display, press the AUTO-M, then simultaneously press channel button 6 for approximately 2 seconds. Indication ?�CODE?� will be displayed approximately 5 seconds. After the display disappears, the code number is deleted.
6. When the display shows ?�Err?� (error), repeat the procedure from 4.
| 
