 printable version
Installing the oil filter
ATTENTION Remove and install all of the elements only when engine is cold, otherwise, you can get severe burns or serious injury. Poddomkrachennoe, but not fixed the vehicle is dangerous. Never work around or under a lifted vehicle if it is not securely fixed supports. In case of spillage of engine oil on the front pipe exhaust system, wipe it off completely. If you do not uncheck the spilled oil, it will be a source of white smoke due to the high temperature. |
Remove the bottom cover. Remove the oil filter by using a special device. Use a clean cloth to wipe the seat surface on the engine block. Apply clean engine oil to the gasket of the new oil filter.
Install the oil filter by using a special device and observing the specified torque (Fig. 2.289). The inhaling moment: 11,7-15,7 Nm. Pour the required amount of engine oil. Start the engine and check for oil leaks. If there is oil leakage, find the cause and repair or replace the faulty item. Check the oil level. Install the bottom cover.
| 
