add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 3 (2003 release)

general info. full specifications. diagnostics. hints. tips. tricks
Mazda 3
Home
 
Mazda
3
Operation and maintenance of car
Engine
Transmission
Chassis
Steering Gear
Brakes
Overview
Safe brake pedal
Vacuum brake booster
The main brake cylinder
Pressure regulator
Brake fluid level
Anti-lock brakes (ABS)
Management of dynamic stability
The control lamp DSC
The switch of system DSC, warning lamp off the DSC
The combined dynamic stability control sensor
Block DSC HU / CM system dynamic stability
Management of emergency braking
Controller Area Network (CAN)
On-board diagnostics
brake system
Tables
Onboard electric
Body
 


Hit Counter by Digits


print page printable version

Management of emergency braking



When emergency braking block DSC HU / CM increases the brake fluid pressure by increasing the pressure in the master cylinder, so a large braking force is achieved with less brake pedal is depressed.
System DSC HU / CM uses a built-in sensor of the brake pressure to control the rate of pressure change in the master cylinder, brake assist is activated when the rate of change of pressure exceeds a predetermined value, so the system determines the condition of emergency braking.
System DSC HU / CM calculates the cylinder pressure of the brake mechanism that increases the fluid pressure in the master cylinder to a predetermined value. By changing the pressure in the master cylinder pressure can be increased in the brake cylinder.
In addition to the normal brake fluid pressure, since all the electromagnetic valves are included, a motor drives a pump which increases the pressure in the brake system.

The control circuit emergency braking vehicle Mazda 3
Fig. 6.7. The control circuit emergency braking vehicle Mazda 3: 1 - normal braking; 2 - braking mode without brake assist; 3 - the main cylinder; 4 - solenoid valve maintain stability; 5 - solenoid valve to maintain pressure; 6 - solenoid valve pressure reduction; 7 - motor pump; 8 - solenoid switch traction; 9 - the pump; 10 - piston calipers


Brake Assist runs at speeds of 17 km / h or higher, and does not turn at speeds of less than 5 km / h.





« previos page
Block DSC HU / CM system dynamic stability
next page »
Controller Area Network (CAN)

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.