add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 3 (2003 release)

general info. full specifications. diagnostics. hints. tips. tricks
Mazda 3
Home
 
Mazda
3
Operation and maintenance of car
eleven Description of vehicle
Restraint System
Car use to destination
Engine start
Control manual gearbox
Control automatic transmission
The system ESP (cruise control)
Enable / disable cruise control
Setting the speed to be stabilized
Increase the speed to be stabilized
Reduced rate stabilized
Switching off the cruise control system
The traction control system (TCS)
Protivozanosnaya system (DSC)
Stabilization of the rear axle
Hitch
Troubleshooting arisen in a way or before driving
Tables
Engine
Transmission
Chassis
Steering Gear
Brakes
Onboard electric
Body
 


Hit Counter by Digits


print page printable version

Setting the speed to be stabilized



1. Turn the cruise control system by pressing the main switch ?�ON / OFF?�.
2. Accelerate the vehicle to the desired speed (at least 30 km / h).
Press and release the ?�SET / COAST?� at the speed of the car, you want to keep. At the same time, release the accelerator pedal.
Do not hold the switch down. Otherwise, if the driver does not press the accelerator pedal, the vehicle speed will fall as long as the button switch is released. At the same time you may miss the desired speed.

NOTE
Feature ?�SET?� set the desired speed can be enabled no earlier than 2 seconds after pressing the main switch ?�ON / OFF?�. On the steep slope the vehicle can quickly lose speed when driving uphill or quickly get up to speed when driving downhill.




« previos page
Enable / disable cruise control
next page »
Increase the speed to be stabilized

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.