REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 6 (2002 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mazda
	6
		Operation and maintenance of car
		Engine
		Transmission
		Chassis
		Steering Gear
		Brakes
		Onboard electric
		Body
			Overview
				The design of the car with a body "sedan"
				The design of the car with a body "hatchback"
				Body shell
				Curtain and decorative components of a body
				Door
				Windows
					Main characteristics
					Window motor servo
					Servo system locks doors
					Removing and installing electric window regulator with servo
					Removing and installing electric window motor servo
				Disassembly and assembly of the boot lid
				Removing and installing front bumper
				Disassembly and assembly of the front bumper
				Removing and installing rear bumper
				Removing and installing rear trim
				Removing and installing rear spoiler
				Outside mirrors
				Removal and installation of external electric mirrors
				Disassembly and assembly of the external electric mirrors
				Rear Defrost
				Sunroof
				Seat belts
				Seats
			Air conditioning and heating

printable version

Main characteristics

Fig. 8.29. Windows of Mazda 6: 1 - driver's side; 2 - the main switch with a window actuator; 3 - in addition to the driver's side; 4 - switch window servo; 5 - power window motor servo; 6 - servo control window; 7 - door switch

On the basis of pulse signals from proximity switches Hall sensor power window motor servo control module window in its main switch determines the position and direction of movement of the window glass. Accordingly, the main switch controls the servo system power windows with driver's side (Fig. 8.29).

Fig. 8.30. Electric windows wiring diagram: 1 - the main switch with a window actuator; 2 - manual closing; 3 - manual opening; 4 - AUTO; 5 - the switch of a power outage; 6 - closed; 7 - open; 8 - the relay closure; 9 - opening relay; 10 - Window Switch servo; 11 - front electric window motor servo (driver's side); 12 - contactless electronic switch sensor Hall number 1; 13 - contactless electronic switch sensor Hall number 2; 14 - front electric window motor servo (passenger side); 15 - electric rear window with actuator (right side); 16 - electric rear window Servo (left side); 17 - motor servo system with rear windows; 18 - door switch (driver's side); 19 - door switch (passenger side); 20 - the switch of the door (the back right side); 21 - the switch of the door (rear left side)

When the starting position is set before the transfer vehicle, the position of the window glass and the direction of operation are stored in the control module at the main power window switch valve. Thus, the adjustment of the reference position is necessary if disconnected: a cable - from the negative terminal of the battery, the main switch and power window motor connector to the servo (Fig. 8.30).

NOTE

If the initial position has not been set, the auto function of the servo power windows with driver's side auto-return glass and precise movements will not be available.

« previos page
Windows

next page »
Window motor servo