Adjusting the hood

Remove the front fender.

Remove the front fender.

Loosen the bolts adjusting the hood hinges and close the hood.

Tighten the screws (Fig. 8.11).

Check the clearance between the hood and the body (the body) in the cross section shown in Figure 8.12.

Gap:

and - 2.5-4.5 mm.

Turn the adjustment screw to set the desired height of the hood (Fig. 8.13).

Make sure that the height between the bonnet and the body (the body) in the cross section shown in Figure 8.14, is within the specified values.

Height:

a - 3,0-6,0 mm;

b - 3,0-6,0 mm.