REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 6 (2002 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mazda
	6
		Operation and maintenance of car
		Engine
		Transmission
			Clutch
			Manual Transmission
				Overview
				Checking and changing the oil in a mechanical transmission
				Removing and installing speedometer car (without DLD)
				Replacing the oil seal (differential)
				Removing and installing gearshift
				Carter clutch housing demolition elements of the main transfer
					Check of elements of the input shaft
				Testing and assembly of components of the differential and final drive housing
			Automatic transmission
			Drive Train
		Chassis
		Steering Gear
		Brakes
		Onboard electric
		Body

printable version

Check of elements of the input shaft

Fig. 3.48. Check the clearance between the gears of 3rd and 2nd gear

Measure the clearance between the gears of 3rd and 2nd gear (Fig. 3.48).

If the clearance exceeds the maximum, check the contact surfaces of gear 2nd and 3rd gear synchronizer sleeve 3/4-th gear. Replace worn or damaged parts.

Clearance: 0.05-0.20 mm.

Maximum: 0.25 mm.

Fig. 3.49. Check the clearance between the gear 4th gear and the bearing

Measure a backlash between a gear wheel of 4th transfer and the bearing (Fig. 3.49).

If the clearance exceeds the maximum, check the contact surfaces of gear 4th gear, bearing and synchronizer sleeve 3/4-th gear. Replace worn or damaged parts.

Clearance: 0.17-0.37 mm.

Maximum: 0.42 mm.

« previos page
Carter clutch housing demolition elements of the main transfer

next page »
Testing and assembly of components of the differential and final drive housing