REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 626 (from 1991 to 1998, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mazda
	626
		Instructions
		Maintenance
		Engines
		Heating and ventilation
		Fuel system
		An exhaust system
		Transmissions
		Coupling and semiaxes
			Introduction
			Specifications
			Clutch
				Cylinders drive clutch
				Hydraulic Drive System Clutch
				Elements of the clutch mechanism
				Release bearing release bearing and fork
				Adjust the clutch pedal
				Interlock Switch
			Semiaxes
		The brake system
		Chassis
		Body
		Electrical
		Wiring
		Tips and Tricks

printable version

Interlock Switch

The connectors Interlock Switch

1. 3-pin connection

2. 5-pin connection

Check

PERFORMANCE ORDER

Check that the switch closes the circuit when you press the clutch pedal. At the same time between terminals 1 and 2 of connector connection should be conductivity. When the pedal is released, the switch must break the chain. Adjust or replace the switch if necessary.

Replacement

PERFORMANCE ORDER

1. Disconnect the connection of the switch. Further, depending on the model, turn the switch on the 90 ?� and remove it from the mounting bracket and unscrew the two screws and remove the switch.

2. Installation is spent upside-down removals.

Adjustment

PERFORMANCE ORDER

Turn off fixing screws and adjust the position of the switch as needed. Tighten the retaining nuts.

« previos page
Adjust the clutch pedal

next page »
Semiaxes