REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 626 (from 1991 to 1998, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mazda
	626
		Instructions
		Maintenance
		Engines
		Heating and ventilation
		Fuel system
		An exhaust system
		Transmissions
		Coupling and semiaxes
		The brake system
		Chassis
			Introduction
			Specifications
			Charms
				Strut front suspension
					Replacement of the strut
					Bracket Kit
					The hub and the front hub bearing
					Stabilizer bar front suspension
					Wishbone
					Replacement ball joints
				Rear strut
				The size of tires
				Wheel alignment
			Steering
		Body
		Electrical
		Wiring
		Tips and Tricks

Bracket Kit

Withdrawal

PERFORMANCE ORDER

	1. Remove the heel with the hub nuts.
	2. Remove the hub nut.
3. Lift the car and establish it on support. Remove the wheel.
4. Remove the brake caliper, caliper bracket and brake disk.
	5. Remove the ABS sensor if necessary.
6. Turn off fixing nuts of an arm of the hub.
7. Disconnect the tie rod from the lever arm hub.
8. Disconnect the ball joint from the bracket hub.
9. Remove the axle from the hub.
10. Remove the retaining bolts and remove an arm of the hub.

Setting

Installation is spent upside-down removals.