add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 626 (from 1991 to 1998, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Mazda 626
Home
 
Mazda
626
Instructions
Maintenance
Engines
Heating and ventilation
Fuel system
An exhaust system
Transmissions
Coupling and semiaxes
The brake system
Chassis
Body
Electrical
Wiring
Tips and Tricks
A few tips when buying a car
Broken room
Purchase of the old car or a mysterious set of numbers and letters
Durability of the car
About parallelism of bridges of the car and trailer
Preparation of the car for winter
More alive than dead:
What you need to know, changing oil
The owners of the diesel car
As the conditioner works and what to do if it is out of order
"Machine"
Probuksovochka
Features of operation of brake system
To understand why you need a shock, - try to ride without it:
Avtomakiyazh
The electric motor
 


Hit Counter by Digits


print page printable version

Probuksovochka



"What can be caused by slipping the clutch or incomplete off when pressing the pedal?"

Slipping the clutch is shown that under quite serviceable engine the car badly overcomes liftings, slowly dispersed. This may be caused by lubricating with disks, their strong deterioration, decrease in elasticity of springs, the lack of free running clutch pedal.

Incomplete clutch causes difficulty and noise during gear changes and can lead to premature failure of synchronizers and to the accelerated wear of tooth gear box. This failure is most often caused by pollution, a warp or deformation of disks, wrong adjustment of position of the arms off, as well as at too big free during the clutch pedal.

It should be borne in mind that the noise in the gearbox - it is not always a consequence of incomplete clutch. This noise may occur when wear or incorrect adjustment of bearings, as well as deterioration or wrong gearing of bevel gears. Strong knock in these locations indicates the presence of a serious problem that requires an immediate stop of the car and repair the unit.

"What can be a hassle shift or shuts down unexpectedly?"

The crux of the shift or spontaneous off - the result of deterioration of locks and latches or drive shift mechanism. There without serious repair is necessary.

To prevent such failure in the following ways: periodically carefully to check reliability of fastening of all units and power transmission parts, as well as to monitor the level of oil in the gearbox and in time to change it.





« previos page
"Machine"
next page »
Features of operation of brake system

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.