| 1. Place the front wheels straight. Remove the wheel guards and the bottom of the engine. |
| 2. Connect the hoist to the engine. |
| 3. Remove the tie rods from the brackets hub. |
| 4. Remove the cross member and bracket gearbox. Disconnect the oxygen sensor connector connection. Disconnect the exhaust pipe from the exhaust manifold. |
 | 5. Establish the pallet under the steering and disconnect hydraulic tubes from the steering mechanism (arrow) and the return line from the steering mechanism. |
| 6. Remove the cover universal joint. Mark the installation position of the hinge on the input shaft of the steering mechanism. Remove the pinch bolt joint. |
| 7. Remove the rear engine mounting. |
| 8. Lower the suspension cross member and remove the stabilizer bar. |
 | 9. Turn off fixing bolts (are specified by arrows), disconnect the steering column shaft of the steering mechanism and remove the steering. Replace the steering gear mounting pads if they are worn. |
