add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Almera (from 1995 to 1999, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Nissan Almera
Home
 
Nissan
Almera
General Information
General requirements for car repair
Operation and maintenance of car
Petrol engines
Diesel engines
Transmission
Chassis
A steering
The brake system
Electrical
Body
Basic information
Body repair
Removing and installing bonnet
Removing and installing front bumper
Removing and installing rear bumper
Removal and installation of a forward wing
Removing and installing the front and rear doors
Removing and installing front door trim
Removing and installing rear door trim
Removal and installation of windows front and rear doors
Removal and installation of the outside door handle
Removing and installing door locks
Removal and installation of glass
Removing and installing tailgate (body type hatchback)
Removing and installing rear lid (sedan type)
Removal and installation of the instrument panel
Heating and ventilation system
Climate control (air conditioning)
The system of airbags and seat belt pretensioners
Applications
Scheme of electrical equipment
 


Hit Counter by Digits


print page printable version

Removing and installing front door trim



Details of the front door trim
Fig. 9.18. Details of the front door trim: A - models of release till April 1996 .; B - models of release since April 1996 .; B - four-and five-door cars; T - three-door car; 1 - interior doors; 2 - pocket door trim; 3 - arm; 4 - facing internal handle lock actuator;
5 - inner door handle; 6 - switch panel electric windows


Details of the front door trim shown in Fig. 9.18.

Removing the lining of the internal handle of the door lock actuator
Fig. 9.19. Removing the lining of the internal handle of the door lock actuator

(
Removing the control panel, power windows
Fig. 9.20. Removing the control panel, power windows


Attachment points front door trim (upper part
Fig. 9.21. Attachment points front door trim (upper part


Disconnect the negative battery terminal. Use a screwdriver or other tool with a flat blade, remove the trim on the inside handle of the door lock actuator Fig. 9.19). On models with a mechanical lifter, remove the window handle. On models with electrolifts electrolifts remove the control switch on the armrest (Fig. 9.20) and remove the appropriate wires to it. On models manufactured before April 1996, remove the armrest and remove the three screws under them. On models manufactured after April 1996, remove the inside door handle by removing the bolts of its fastening. Remove the bolts the door trim (Fig. 9.21, 9.22). With a flat tool separate from the door trim.

Attachment points front door trim (bottom)
Fig. 9.22. Attachment points front door trim (bottom)


Refitting procedure in the reverse of removal.




« previos page
Removing and installing the front and rear doors
next page »
Removing and installing rear door trim

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.