 printable version
Replacing the mechanical valve
To replace the mechanical valve, do the following:
| Fig. 4.4. Mechanical valve EGR (engine 1Z): 1 - a nut; 2 - an arm; 3 - conduit; 4 - a bolt; 5 - a lining; 6 - intake system; 7 - Valve; 8 - exhaust manifold
|
- Disconnect the tube 3 (Fig. 4.4) from the valve 7; - Remove the gasket. Installation of the valve is carried out in reverse order of removal. When installing the valve the following guidelines: - Use new nuts and gasket; - Check the connection of hose; - Attach the nozzle, set screws, without tightening them, make sure that the pipe does not undergo deformation. Tighten the screws.
| 
