REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Passat B5 (from 1996 to 2004, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Volkswagen
	Passat B5
		Instructions
		Maintenance
		Engines
		Cooling
		Fuel system
		Motor Control
		An exhaust system
		Transmission
		Chassis
		Steering
			general information
			Airbag
			Steering wheel
			Rod Assembly
			Install the power steering pump
			The corners of the front axle
			The basic malfunctions of steering and suspension
		Brakes
		Body
		Heating, ventilation
		Electrical

printable version

Install the power steering pump

Elements of the power steering

1 - steering gear,
2 - pressure line,
3 - the return line,
4 - a cover popolnitelnogo tank probe,
5 - filter
6 - a bolt, 10 Nm
7 - popolnitelny tank,
8 - a rubber support,
9 - a collar,
10 - the return line,
11 - Clamps,
12 - a bolt, 10 Nm
13 - the heat exchanger,
14 - clip
15 - a collar,
16 - the suction pipe,

17 - a collar,
18 - tutser, 50 Nm
19 - O-ring 18x24,
20 - the power steering pump,
21 - a sealing ring 16h22,
22 - connecting hollow bolt, 50 Nm
23 - a bolt, 20 Nm
24 - mounting bracket,
25 - a collar,
26 - a sealing ring 16h22,
27 - connecting hollow bolt, 50 Nm
28 - the power steering pump, mounted on the turbo engines

A warning

The return line 10 connects popolnitelny tank with a heat exchanger and is not installed on all models of cars.

The heat exchanger 13 is not installed on all models of cars.

PERFORMANCE ORDER

1. Before installing the power steering pump fill it with fresh oil. Through the pump suction port fill with oil and turn the pump shaft by hand until then, until the oil comes out of the pumping tube.

2. Install the power steering pump into place and secure it with two screws to conventional hex head bolt and a hexagon socket and tighten bolts to 20 Nm.

« previos page
Rod Assembly

next page »
The corners of the front axle