add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Passat B6 (from the year 2004)

general info. full specifications. diagnostics. hints. tips. tricks
Volkswagen Passat B6
Home
 
Volkswagen
Passat B6
Operation and maintenance of car
Engine
Transmission
Chassis
Steering Gear
Overview
Preliminary checks
Repair of steering
Removing and installing steering wheel
Removing and installing steering column
Maintenance and Transportation steering column
Check the column for damage
Removing and installing the support bracket
Removing and installing damper
Removal and installation of the steering mechanism
Setting steering
Removal and installation of anther
Removing the steering rod
Installing the steering rod
Tables
Brakes
Onboard electric
Body
diagrams
 


Hit Counter by Digits


print page printable version

Removing the steering rod



Set the wheels straight.
Clean steering box in the boot.
Hold by turning the tie rods 2, loosen the lock nut 3 (Fig. 5.28).
Remove the front wheel.
Loosen the nut a few turns rod end, but do not remove it.
To protect the nut thread wound on leave a few threads of the upper finger.
With the help of a stripper of spherical hinges press out the tie rod end from the steering knuckle. Now you can unscrew the nut.

Tie Rod
Fig. 5.28. Tie Rod


Remove the spring clip (Pos. 1 Fig. 5.28 ticks to set the clamps with the bellows and slide it towards the steering rod.
Remove the collar and pull boot from steering box housing.

Unscrewing steering rod
Fig. 5.33. Unscrewing steering rod


Using the tip SW 38 (spanner), unscrew the tie rod from the rack (Fig. 5.33).

NOTE
In case of visible signs of corrosion, damage, wear or contamination of the rack steering assembly is replaced.
In the absence of a visible film of grease on the steering rack assembly and replaced.




« previos page
Removal and installation of anther
next page »
Installing the steering rod

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.