| 1. Check the seals on the porosity and cracks. If one is damaged gasket must be replaced at the same time all the pads. |
 | 2. When installing the gasket particular attention to the correct seating in the rear recess. |
| 3. Tighten the bolts of the case of the cylinder head to a torque of 10 Nm |
| 4. Install the spark plugs in a proper way, to explain the installation on the body of the cylinder head is stamped scheme. |
| 5. Secure the spring clamps and tighten the cover bolts. |
| 6. Slide the ventilation hose of the engine and lock the clamp. |
| 7. Install the air filter. |
| 8. Warm up the engine to operating temperature and check the tightness of the cylinder head cover, especially in the rear recesses. |
