REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz C-Class (from 1993 to 2000, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mercedes-Benz
	C-class
		Introduction
		Maintenance
		Engines
			The petrol engine (DB)
			Diesel engine (DD)
				Introduction
				Engine
				Cars with air conditioning
				The bottom cover of the engine compartment
				Covers cast holes
				Chain tensioner
				Camshaft
				Cylinder Head
				Valve stem seals
				Cylinder head cover (2,2 / 2,5)
				Hydraulic bucket tappets
				Valves
				Valve guide
				Valve seats in the cylinder head
				The cylinder head and engine block
				Compression
				V-ribbed belt
				Tensioned V-ribbed belt device
				Fault diagnosis (DD)
		Lubrication system
		Cooling
		Heating and ventilation
		Ignition system
		Fuel system
		Chassis
		Steering
		Brakes
		Body
		Electrical

Cylinder head cover (2,2 / 2,5)

Cylinder head cover is removed, for example, for disassembly nozzles camshaft or cylinder head.

Withdrawal

PERFORMANCE ORDER

1. Disconnect a wire of "weight" batteries.

A warning

This erased anti-theft radio code.

2. Remove the cross tube of the air filter.

3. Remove the wire channel on the engine (3).

4. Remove the top cover (4).

5. Remove the ventilation system of the engine (5) of the cylinder head and remove the reconnecting. It does not bend the air lines.

6. Remove the drain masloshlangi with nozzles.

7. Remove the bolts (6) cylinder head cover.

8. Remove the cylinder head cover (7) with the gasket (8).

Setting

PERFORMANCE ORDER

	1. Before installing the cylinder head cover Track correctness of landing (arrow) bushes cover (1). Replace damaged sealing rings.
2. Install the cylinder head cover with gasket and tighten to a torque of 10 Nm, t. E. Not very much. Replace damaged gasket.
3. Connect the fuel injection pipes and drain masloshlangi.
4. Connect the hose and attach the ventilation motor.
5. Replace the plastic cover and wire channel.
6. Install the cross tube of the air filter.
7. Connect the battery earth cable (-).
8. Set the anti-theft code for the radio.
9. Start the engine and check for oil-tightness.