add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Audi A6 (1997 release)

general info. full specifications. diagnostics. hints. tips. tricks
Audi A6
Home
 
Audi
A6
General Information
Operation of the vehicle
Maintenance
Engines
Ignition, fuel injection and exhaust of gasoline engines
The power supply system, and preheating the exhaust gases of diesel engines
Lubrication System
Cooling system
Coupling
Overview
Clutch Master Cylinder
Bleeding of the hydraulic clutch
The mechanism of the clutch
Clutch plate
Removing the driven and clutch pressure plate
Check clutch parts
Install clutch
Transmission
The front wheel drive shafts
Design features four-wheel drive transmission
Suspension
Wheels and tires
Steering
Brakes
Body
Heating and air conditioning
Electrical
Electric schemes
 


Hit Counter by Digits


print page printable version

Clutch plate



A WARNING
When the clutch is formed dust containing asbestos is harmful to health, so the purification of the clutch, do not use compressed air and do not inhale the dust. Clutch parts clean from dust using the brake fluid, or methyl alcohol, and then wipe dry.


NOTE
When installing screws 2 (Fig. 8.8) must be replaced with new ones.
Lubricate the splines of the driven disk with a thin layer of grease G000100. A lubricant layer should be thin and uniform, since the clutch operation is excessive lubricant dropped on the clutch surface, which can disrupt its operation.


Flywheel and clutch
Fig. 8.8. Flywheel and clutch: 1 - dual-mass flywheel; 2 - bolt 60 Nm and tighten by 180 ?�; 3 - clutch plate; 4 - the pressure plate; 5 - bolt 22 Nm; 6 - the needle bearing


Tightening bolts 5 evenly over the "star."




« previos page
The mechanism of the clutch
next page »
Removing the driven and clutch pressure plate

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.