 printable version
Setting
The new steering wheel is available in the transport condition interposition of the base and the top of the steering column is fixed using a plastic rod and clamp. After installing the steering column on the vehicle must be removed and a plastic retainer rod.
| Fig. 14.8. Arrangement of bolts of fastening of a steering column
|
Install the steering column on the vehicle and tighten the bolts (see. Fig. 14.8) so that the steering column could still move.
| Fig. 14.7. Location nuts (1) and clips (2) securing the universal joint of the steering column
|
Install the universal joint shaft on the steering Insert the eccentric screw, turn it counterclockwise, install the nut on the bolt and tighten to 30 N ?� m (see. Fig. 14.7). On vehicles with automatic transmission, connect a cable lock selector lever. On vehicles with electric steering column adjustment, connect electrical connections to the servo motors of the steering column. On vehicles with automatic transmission, set the steel bracket cable lock selector lever. Set the switches and column cover. Align the relative position of the steering column and tighten bolts of its fastening torque of 20 Nm. Make sure that the front wheels are mounted for movement directly. Install the steering wheel. Connect a wire of "weight" to the battery. Turn on the radio and enter the code. Lift up the power window glass until it stops. Then press all the switches window again, at least 1, in the closed position of the control unit to activate windows. Set the clock.
| 
