add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Audi A6 (1997 release)

general info. full specifications. diagnostics. hints. tips. tricks
Audi A6
Home
 
Audi
A6
General Information
Operation of the vehicle
Maintenance
Engines
Ignition, fuel injection and exhaust of gasoline engines
The power supply system, and preheating the exhaust gases of diesel engines
Lubrication System
Cooling system
Coupling
Transmission
The front wheel drive shafts
Design features four-wheel drive transmission
Suspension
Wheels and tires
Steering
Brakes
Body
Overview
The front panel with a transverse auxiliary elements
Front fender
Hood
Grille
A cable of opening the bonnet
Front bumper
Shock Absorber
Rear bumper
The trunk lid
The hinge lid
The front door and its elements
The back door and its elements
The windscreen and rear window
Glovebox
Interior rearview mirror
The center console
The front section of the center console
Cigarette lighter
Dashboard
Carpet covering
Elements of interior upholstery
Heating and air conditioning
Electrical
Electric schemes
 


Hit Counter by Digits


print page printable version

The hinge lid



Withdrawal

Finishes gas-filled strut lid
Fig. 16.23. Finishes gas-filled strut lid: 1 - finishing gas-filled strut; 2 - electric wires; 3 - gas-filled strut; 4 - bolt, 8 Nm; 5 - thrust plate; 6 - the hollow piston; 7 - a bolt, 8 Nm; 8 - thrust plate; 9 - a hollow piston


Remove the trim 1 (Fig. 16.23) of the hinge lid and remove the electric wires 2 of the central locking of the lower latch finishing 1 gas-filled strut lid.
Using a marker, mark the position of the hinges on the trunk lid.

Elements of fastening of the hinge lid
Fig. 16.24. Elements of fastening of the hinge lid: 1 - hinge lid; 2 - nut 21 Nm; 3 - Bearing; 4 - hinge; 5 - gas-filled strut; 6 - lock; 7 - bolts 21 Nm; 8 - adjusting labels


Ask the assistant to support the trunk lid in the open position, turn the nut 2 (Fig. 16.24) fastening the hinge to the lid and remove the lid of the trunk.
7 Remove the screws fastening the extreme base of the hinge.
Blade screwdriver to push the locking springs at both ends of the gas-filled strut.
Remove the top and bottom hinges 4 gas-filled strut on the tailgate hinge.
Remove the middle bolt 7 and remove the hinge from the vehicle.

Setting
Installation is spent to sequences, return to removal, taking into account the following.
8 Adjusting labels simplify installation and adjustment of the hinge and lid.




« previos page
The trunk lid
next page »
The front door and its elements

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.