Safe vehicle lifting

In order to secure the lifting jack, do the following.

1. Place the vehicle on a flat, hard surface.

2. Before lifting the car free of foreign objects. Beforehand, remove from the trunk of everything you need for repair (spare parts, tools), as access to the raised vehicle can be difficult or impossible.

3. Install the jack only for those places that are designed for this purpose. Power tailgate at these places specially thickened and have increased durability.

4. Place a wheel chocks under the wheels of the car on the side opposite to rise.

5. In order to prevent subsidence and indentation in the ground jack placing it on the board (see 20h20h2).

6. Move the abutment head to the vehicle body, wherein a jack to be installed perpendicular to the supporting surface.

7. Before a jack to raise the vehicle to the desired height, again carefully check to see whether he banked in any direction.

8. Supports also install only under specially designed to lift the car seat. Between the support and the body of the car puts a rubber or wooden lining.

9. Place the tripod support so that its two legs from the vehicle body, and one - from the outside.

When used to lift the vehicle lift, observe the following safety requirements.

1. During the lifting and lowering of the car is prohibited to be close to him in order to avoid an accident.

2. If there is a danger of falling car immediately leave the danger zone.

3. correctly positioned on the lift center of gravity of the vehicle to prevent it from falling.

4. Take care of the feet, so as not to squeeze their legs lift or wheels when the vehicle is lowered.

5. Do not use excessive force to controls lift.

6. Manage the lift must only qualified personnel.

7. Avoid excessive rocking of the car on a lift.

8. Paws lift place only under the places that are designed for this purpose. Power tailgate at these places specially thickened and have increased durability.

9. When removing heavy components and assemblies to the car, located on the hoist, install additional support.