Removal and installation of the switch (lock) of ignition

The switch (lock) of ignition is mounted on the steering column and is secured by two bolts with samosrezayuschimisya heads, so to replace the bolts must be removed with an electric drill or chisel. The switch (lock) of ignition can be changed without removing the steering column, but for convenience, you can remove it (see. "Removing and installing steering column").

You will need: a screwdriver with a flat blade and Phillips, a chisel, a hammer.

1. Disconnect a wire from the plug "minus" of the storage battery.

2. Remove the steering column covers (see. "Replacement of the contact group, the switch (lock) of ignition").

3. Remove the bolt switch, hitting chisel hammer through tangentially counterclockwise.

4. Similarly remove the second bolt ...

11. Install the parts in reverse order of removal.