add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Chevrolet Lanos (since 2004 of release), Daewoo Lanos (since 1997 of release)

general info. full specifications. diagnostics. hints. tips. tricks
Chevrolet Lanos
Home
 
Chevrolet
Lanos
Device Car
Operating Guidelines
Faults in the way
Maintenance
Engine
Transmission
Chassis
A steering
The brake system
Electrical
Body
Design Features
Possible malfunctions of the body, their causes and remedies
Removing, dismantling and installation of bumpers
Removing, dismantling and installation of the front bumper
Removing, dismantling and installation of the rear bumper
Removing and installing radiator grille
Removal and installation of mudguards of wheels and Lockers
Removal and installation of a forward wing
Removal and installation of a lattice box vozduhopritoka
Hood
Door
The trunk lid
Manhole cover fuel tank filler pipe
Seats
Removal and installation of facing of a tunnel floor
Restraint System (SRS)
Rear view mirrors
Dashboard
Heater and air conditioning
Interior fittings
Removal and installation of facing of salon
Removal and installation of facing the boot
Windscreen wiper
Replacement of the fixed glass body
Removing and installing the attachment flanges of the battery
Care body
Wheels and tires
Purchase of spare parts
A trip to the STO
Winter car operation
Preparation for technical inspection
Tips novice mechanic
Applications
Diagrams
 


Hit Counter by Digits


print page printable version

Removing, dismantling and installation of the front bumper



You will need: all the tools necessary to remove the mud flaps and the front wheel arch liners (see. "Removal and installation of mudguards of wheels and Lockers"), as well as the key "10" face head "12", Phillips screwdriver blade.
1. On both sides of the car, remove the mud flaps and the front wheel arch liners (see. "Removal and installation of mudguards of wheels and Lockers").
2. Open the hood, place it on the palm and turn away a nut of the top fastening of the front bumper to the body on the left ...
3. ... and right.
4. The front wheel arches, unscrew the two screws securing the front bumper to the body ...
... 5. Turn out one bolt of the bottom fastening ...
6. ... one screw side mounting ...
7. ... and remove the front bumper.
8. If necessary, remove the five screws fixing the frame energy absorbing element to the top edge of the bumper, four screws - to the lower edge of the bumper ...
9. Remove the frame ... ...
10. ... and the energy-absorbing element.
11. Assemble and install the front bumper and all removed parts in reverse order of removal.




« previos page
Removing, dismantling and installation of bumpers
next page »
Removing, dismantling and installation of the rear bumper

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.