REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Chevrolet Lanos (since 2004 of release), Daewoo Lanos (since 1997 of release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Chevrolet
	Lanos
		Device Car
		Operating Guidelines
		Faults in the way
		Maintenance
		Engine
		Transmission
		Chassis
		A steering
		The brake system
		Electrical
		Body
			Design Features
			Possible malfunctions of the body, their causes and remedies
			Removing, dismantling and installation of bumpers
				Removing, dismantling and installation of the front bumper
				Removing, dismantling and installation of the rear bumper
			Removing and installing radiator grille
			Removal and installation of mudguards of wheels and Lockers
			Removal and installation of a forward wing
			Removal and installation of a lattice box vozduhopritoka
			Hood
			Door
			The trunk lid
			Manhole cover fuel tank filler pipe
			Seats
			Removal and installation of facing of a tunnel floor
			Restraint System (SRS)
			Rear view mirrors
			Dashboard
			Heater and air conditioning
			Interior fittings
			Removal and installation of facing of salon
			Removal and installation of facing the boot
			Windscreen wiper
			Replacement of the fixed glass body
			Removing and installing the attachment flanges of the battery
			Care body
		Wheels and tires
		Purchase of spare parts
		A trip to the STO
		Winter car operation
		Preparation for technical inspection
		Tips novice mechanic
		Applications
		Diagrams

Removing, dismantling and installation of the rear bumper

You will need: all the tools necessary to remove the mud flaps and wing flaps of the rear wheels (see. "Removal and installation of mudguards of wheels and Lockers"), facing the rear lights and the rear end panel (see. "Removal and installation of facing the trunk"), as well as face head "10", Phillips screwdriver blade.

1. On both sides of the car, remove the mud flaps and the rear wheel arch liners (see. "Removal and installation of mudguards of wheels and Lockers").

2. Open the boot lid and remove the lining of the rear lights and the rear end panel (see. "Removal and installation of facing the boot").


3. On both sides of the luggage compartment, unscrew the nuts and remove the bolts to the ends of the bumper body.	4. Inside the arches on both rear wheels turn out even one bolt fastening the ends of the bumper to the body.


5. Remove the four screws that secure the bumper to the rear end panel ...	6. ... and remove the rear bumper.


7. If necessary, loosen the trunk from inside the two nuts lateral energy absorbing element ...	8. ... and remove the energy absorbing element. Similarly remove the second side energy-absorbing element.

9. If necessary, remove the four screws securing the main energy absorbing element to the rear bumper ...

NOTE

So arranged fastening screws of the central energy absorbing element to the bumper.

10. ... and remove the central energy-absorbing element.

11. Assemble and install rear bumper and all removed parts in reverse order of removal.