add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Chevrolet Lanos (since 2004 of release), Daewoo Lanos (since 1997 of release)

general info. full specifications. diagnostics. hints. tips. tricks
Chevrolet Lanos
Home
 
Chevrolet
Lanos
Device Car
Operating Guidelines
Faults in the way
Maintenance
Engine
Transmission
Chassis
A steering
The brake system
Electrical
Body
Design Features
Possible malfunctions of the body, their causes and remedies
Removing, dismantling and installation of bumpers
Removing and installing radiator grille
Removal and installation of mudguards of wheels and Lockers
Removal and installation of a forward wing
Removal and installation of a lattice box vozduhopritoka
Hood
Door
Removing and installing front door trim
Replacing the glass front door
Replacing the front window
Replacing the outside handle of the front door
Replacement of the internal handle of the front door lock actuator
Replacing the front door lock switch
Replacing the front door lock
Replacing the terminator of opening the front door
Removing and installing front door
Removal and installation of an upholstery of a back door
Replacement glass back door
Replace the rear door window
Replacing the outer rear door handles
Replacement of the internal handle of the rear door lock actuator
Replacement lock the back door
Replace the rear door opening limiter
Removing and installing rear door
The trunk lid
Manhole cover fuel tank filler pipe
Seats
Removal and installation of facing of a tunnel floor
Restraint System (SRS)
Rear view mirrors
Dashboard
Heater and air conditioning
Interior fittings
Removal and installation of facing of salon
Removal and installation of facing the boot
Windscreen wiper
Replacement of the fixed glass body
Removing and installing the attachment flanges of the battery
Care body
Wheels and tires
Purchase of spare parts
A trip to the STO
Winter car operation
Preparation for technical inspection
Tips novice mechanic
Applications
Diagrams
 


Hit Counter by Digits


print page printable version

Replacing the front door lock



You will need: a key TORX T40, Phillips screwdriver blade.
1. Remove the front door trim and moisture proof film (see. "Removing and installing front door trim").
2. Remove the internal handle of the front door lock actuator (see. "Replacement of the internal handle of the front door lock actuator").

NOTE
To remove the internal handle is necessary because the disconnect actuator rod from the lock installed on the door, it is very difficult. Comfortably furnished with locking rods and in turn to release the rod from the handle you want to remove it.

3. Undo the plastic retainer rod outside handle and remove the rod from the lever handle.
4. Similarly disconnect draft from the lock switch.
5. Remove the three screws securing the lock to the door panel.
6. Remove the lock from the car, moving it through the technological hole in the door panel.
7. If you change the lock, unclip the plastic clips and disconnect the linkage arm lock rods from the inside handle lock actuator ...
8. cravings ... lock ...
9. ... and the draft from the outside handle.
10. To remove the latch lock of the front door, remove the two screws securing it to the front of the body ...
11. ... and lift the latch.
12. Install the front door lock and all the removed parts in reverse order of removal.

NOTE
If necessary, adjust the clarity of locking the lock latch moving in a vertical or horizontal direction by loosening its tightness.




« previos page
Replacing the front door lock switch
next page »
Replacing the terminator of opening the front door

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.