printable version
Check keeping winding of the traction relay
Disconnect the field coil wire from terminal "M" pulling the relay.
| Fig. 7.59. The scheme of check holding winding traction relay
|
Connect the wires from the terminals 12 V battery to a conclusion ?�S?� (+) and the starter (Fig. 7.59).
ATTENTION This test must be carried out quickly, no more than 10 seconds, to prevent the coil from burning starter. |
If the pinion gear, launched by hand until it stops, remains in the extended position, thus retaining the winding OK. If the gear is retracted, it means there is a breakage in the holding coil. In this case, replace magnetic switch.
|