 printable version
Adjustable seats
ATTENTION Adjusts the seat only with the vehicle stationary. Failure to do so may result in loss of vehicle control and road traffic accidents (accidents). |
Adjusting the longitudinal position of the front seats
| Fig. 1.88. Adjusting the longitudinal position of the front seats
|
To move the seat longitudinal position, raise the control lever up. Thus, the seat is free, and it can be moved back and forth in a comfortable position. After installing the release control lever and slightly move the seat forward or backward to lock it in position.
To tilt the seatback
To tilt the seat back bend forward to remove your weight from the back of the seat and pull the lever to adjust the backrest angle is located on the outside of the seat up. Click on the seat back and insert it into the desired position. to lock the seat back in a new position, release the control lever it back.
ATTENTION In order to reduce the risk of injury in a car accident (crash) or sudden stop when driving, the seat backs of the driver and front seat passenger should be in a position as close as possible to the vertical. The effectiveness of the protection of seat belts and airbags can be reduced significantly when the seat back is tilted. There is a strong likelihood that when the seat back is tilted, the driver and front passenger can slide out from under the safety belt, which will cause serious injuries in the collision of a car during a traffic accident (crash). The seat belt can not provide full protection of the passenger when the seat is tilted back his. |
Adjustable head restraints
Head restraints protect the neck. To raise the headrest, pull it up. to lower the head restraint, push it down while pressing the tab.
Adjustable lumbar support (driver's seat only) (optional)
To adjust the lumbar support, turn the special lever located on the outside of the left side or back of the driver's seat. To increase the strength of support, move the lever lumbar adjustment in the front of the vehicle. To mitigate the strength of support, move the lever toward the rear of the vehicle.
Adjusting the height of the seat cushion (driver's seat only) (optional)
In order to raise or lower the front part of the seat cushion, rotate the front handle forward or backward. In order to raise or lower the rear of the seat cushion, rotate the rear handle forward or backward.
The tray under the front passenger seat
| Fig. 1.93. The tray under the front passenger seat
|
To open it, pull it forward.
Adjusting the longitudinal position of the rear seats
| Fig. 1.94. Adjusting the longitudinal position of the rear seats
|
To move the seat longitudinal position, raise the control lever up. Thus free seat and it can be moved forward and backward to the desired position. After setting the desired position release the adjustment lever and slightly move the seat forward or backward to lock it in position.
Tilt the rear seatback
| Fig. 1.95. Adjusting the longitudinal position of the rear seats
|
To tilt the seatback adjustment lever, pull the seatback towards the headrest and after installation back to the desired position, release the lever. After setting the backrest to the desired position, always check the reliability of its fixing.
Adjustable rear seat headrests (optional)
| Fig. 1.96. Adjusting the rear head restraints
|
To raise the headrest, pull it up. to lower the head restraint, push it down while pressing the tab.
Folding the seat cushion and back rest
| Fig. 1.97. Folding the seat cushion and back rest
|
For convenience, the back and the rear bench seat can be folded down and opened. To fold the seatback and move it to the rearmost position. Remove the head restraints. To fold the seatback, pull the lever and hold the tilt adjustment of the seat back in the direction of the head restraint, and then lower the seat back down.
| Fig. 1.98. Lifting cushions and the rear seat back
|
Pull the lever to unlock the seat up, and then lift up the rear seat cushion (Fig. 1.98).
ATTENTION To prevent damage to the rear seat cupholders located in the rear console, first remove it, and then fold the seatback and the rear seat cushion. |
To fasten your seat fixation loop for attachment below the seat cushion to the holder of the head restraint driver's seat and front passenger seat (Fig. 1.99). Insert the head restraints removed between the backrest and the rear seat cushion so that. they were thrown into the passenger compartment in the event of sudden braking or an accident. To return the backrest and the rear seat cushion to the normal position, repeat the above operations in reverse order. After returning the seatback to the upright position, make sure that it is securely locked, swinging the backrest forward and back for the upper part.
ATTENTION When you return the rear seatback to the upright position after the seat was folded, be careful not to damage the belt or belt buckle. In addition, do not pinch the ribbon tab or the rear seat belt. Folding rear seat cushion forward and leans forward rear seat backrest is designed to carry a larger volume of luggage in the car. Do not let anyone sit on the luggage while driving. When folded back rest can not use seat belts. Incorrectly seated and fastened passengers can severe and even fatal injuries in the event of sudden braking or a traffic accident. Carried baggage should not be placed above the front seat backs. This can lead to the displacement of luggage forward and severe injury in the event of sudden braking or a car accident (crash). When you return the rear seatback to the upright position after the seat was folded, make sure that the head restraints properly recorded. Head restraints are essential for the safety of vehicle occupants in the event of a traffic accident (crash). If the head restraints are not installed in the correct position, the rear-end collision with the possible serious or even fatal injuries. |
Heated front seats (optional)
| Fig. 1.100. Switches the heating of the front seats
|
For trips in cold weather the car has heated front seats. When the engine is running, click on any of the switches heated seat occupant. During mild weather or under conditions where there is no need heated seats, heated seat switches must be in position ?�OFF?� (?�Off."). Do not hold the lighter in a fully recessed. This can result in damage to the heating element and fire. If necessary, replace the cigarette lighter, cigarette lighter, use only the original or equivalent.
Ashtrays
To open the front ashtray, press and otpustiteee upper edge. To remove the ashtray from the socket for cleaning, remove the metal collection of the ashes. Click on the collection of the ashes down and forward in the ashtray, and then pull it out. to put it in place, install a collection of ash in the correct position and press it down and forward to lock the bottom edge of the collection of the ashes in an ashtray. Highlighting ashtray burns only when the external lighting of the vehicle.
Front cup holders (optional)
Holder is used for holding cups and bottles in the existing holes. To use the cup holder for the front passenger, click on the cup holder and pull out.
ATTENTION Do not place objects on the cup holder. They can be thrown into the passenger compartment and injure vehicle occupants during heavy braking or in the event of a traffic accident (crash). |
The rear cup holder (option)
The rear cup holder located on the rear of the main console and serves to keep the glasses and bottles in the existing holes. to use it, press the handle on the rear of the main console down and pull it to the top end.
ATTENTION To prevent damage to the rear seat cupholders located in the rear console, first remove it, and then fold the seatback and the rear seat cushion. Return the cup holder to its original position when not in use. |
Central armrest rear seats (optional)
This armrest is located in the center of the rear seat backrest and a storage compartment. Opening the cover of the glove compartment, you can use it in the cup holder available.
| 
