printable version
Bleeding the clutch
Pumping the clutch should be carried out every time when removing the connecting pipe, hose and / or clutch master cylinder, and when the clutch pedal becomes "soft".
Loosen the bleed screw on the working cylinder (Fig. 3.3). Slowly press the stop on the clutch pedal until the until no leakage of fluid. Hold the pedal to the forward position, tighten the bleed screw. Fill the reservoir fluid required mark to normal levels.
ATTENTION Quickly repeating pedal in the interval B-C (Fig. 3.4) may lead to the fact that when pumping piston of the master cylinder is pushed out from the cylinder. Pressing the pedal should only be done after a full refund to A. |
|