printable version
Combination switch lights, headlights and turn indicators
Turn signal switch As you move down the combination switch blink turn indicators on the left side of the car. As you move up the combination switch blink turn indicators on the right side of the car. After the completion of the turn the switch will automatically move to the neutral position, while the direction indicators stop flashing. If the control indicator lamps on the instrument panel flashes more often than usual, lit but not blinking or does not light up at all, it indicates a fault in the electrical circuits of direction indicators.
Operating mode switch when changing series
| Fig. 1.35. Operating mode switch when changing series
|
Rebuilding lanes motion move the lever up or down to turn on the direction indicators. After releasing the lever automatically returns to the neutral position.
Switch headlamps
Rotate the drum at the end of the combination switch to turn on the headlights. In the first position will be included parking lights, side lights, tail lights and instrument panel lights. The next position will be incorporated headlamps.
Automatic shut-off in the parking lot light (optional) If you do not turn off the parking lights after a stop, they will go off automatically if the driver's door is opened. to turn on the parking lights again, simply turn on the ignition.
Switch beam headlights To enable the high beam headlights push the switch away. At the same time on the instrument panel warning lamp lights turn on high beam. When translating the lever back to the light switches from a distant one to a nearby one.
Flashing lights
Flashing headlights is carried out with a slight movement of the lever is released and the switch. Flashing headlights may even switch the headlamp is set to ?�OFF (?� Off. ").
|